Trevi CMP 574USB Mode D'emploi Et Installation page 14

ENGLISH
To repeat current Directory (for MP3 only)
1. Press PROG./P-MODE button in play mode, until"
display, the current directory will be played repeatedly until the STOP button is pressed.
2. To cancel Repeat function, press the PROG./P-MODE button, until the "
disappear on the LCD display.
RANDOM PLAY
Press the PROG./P-MODE button in play mode till the "RAND " shows steady on the display, the
random play will start from next track automatically(or press CD skip forward button), until all
tracks are played over and then stop. Press the PROG./P-MODE button once to cancel.
LISTENING TO USB FLASH DISK DEVICE
1. Set the FUNCTION switch to CD/MP3/USB position.
2. Connect the USB Flash Disk Device into the USB PORT.
3. If the audio CD in the tray, please press and hold the PLAY/PAUSE/USB/SCAN button to
select the USB function.
4. If the USB is readable, the display will show USB and The total number of tracks after
several seconds.
5. Press the PLAY/PAUSE/USB/SCAN button to start playback.
6. Press the STOP button to stop playing. The display will show total number of tracks.
7. You may
play/random play/skip up and down operation as the same described in above "USING THE
CD/MP3".
Note To exit USB operation, press and hold PLAY/PAUSE/USB/SCAN button to return the CD
mode.
CAUTION:
 Do not use any USB extension cable for connecting the USB stick which may cause harmful
interference
 In case of malfunction due to electrostatic discharge, just reset the product (reconnect of
power source may be required) to resume normal operation.
14
proceed repeat play
FOLDER" shows steady on the
(repeat-1/repeat-folder/repeat-all)/program/program
9
CMP 574USB
FOLDER"