Trevi CMP 574USB Mode D'emploi Et Installation page 13

CMP 574USB
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
 Press the CD SKIP/SEARCH FORWARD/BACKWARD button repeatedly in stop mode or
during play until the desired track appears on the display.
 Press the PLAY/PAUSE/USB/SCAN button to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the CD SKIP/SEARCH FORWARD/BACKWARD button to scan the current
playing track at high speed until desired point passage, and then release the button.
Playback will start again from this point.
To select a song which track number exceeds 10 (for MP3 disc only)
To select a song/track which number exceeds 10, Press the FOLD+/+10/M+ or FOLD-/-10/M-
button each time to skip forward/backward 10 tracks, then press the CD SKIP/SEARCH
FORWARD/BACKWARD button to select desired track. For example: to select the 17
press FOLD+/+10/M+ button, and then press the CD SKIP/SEARCH FORWARD button six
times immediately.
To Select A Desired Folder (for MP3 disc only)
(if the MP3 disc contains more than one folder)
Press and hold the FOLD+/+10/M+ or FOLD-/-10/M- button more than 2 second to skip
next/previous folder. Until the desired folder number appears on the LCD display, then release
the button.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99
tracks can be stored in the memory in any order.
1. In stop mode, press the PROG./P-MODE button, the "P" will flash and the
be on.
2. Press the CD SKIP/SEARCH FORWARD button to select the first desired track to be
programmed.
3. Press the PROG./P-MODE button to enter. The display changes to show
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the PLAY/PAUSE/USB/SCAN button to start playback from the first programmed track.
6. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT
To Repeat a Single Track
1. Press the PROG./P-MODE button once in play mode,
current track will be played repeatedly until the STOP button is pressed
2. To cancel Repeat function, press the PROG./P-MODE button, until the
on the LCD display.
To repeat all the Tracks
1. Press PROG./P-MODE button in play mode, until
tracks on the disc will be played repeatedly until the STOP button is pressed.
2. To cancel Repeat function, press the PROG./P-MODE button, until the
on the LCD display.
" " will show on the display. The
" " shows steady on the display, all
8
ENGLISH
th
track,
P01
indicator will
P02
.
" " disappear
" " disappear
13