Publicité
Les langues disponibles
Les langues disponibles
Safety & Operation
Pre-Use and periodic checks:
•
Check stiles and treads are not split, warped, bowed, loose, rotten or otherwise damaged.
Check all screws, bolts and nuts are secure and tight (do not overtighten).
•
•
Check trapdoor locks into position correctly.
Check metal parts are not corroded or otherwise damaged.
•
•
Check all hinges operate smoothly (lubricate periodically – see label on trapdoor).
•
Check ladder sections operate smoothly when opened.
•
Check ladder sections are straight when fully opened.
•
Check ladder feet rest firmly on the floor.
Check ladder sections are flat and correctly positioned once folded.
•
Use
•
Never use this loft ladder for purposes for which it has not been designed, such as trade or building work.
Never use this product unless it has been fully, and correctly, installed.
•
•
Fully open trapdoor before unfolding the ladder.
•
Ensure the springs and connecting wires have not become trapped or snagged.
•
Ensure the springs and connecting wires are correctly positioned and are secure.
•
Fully unfold ladder before use.
Ensure any catches or locks are fully engaged before ascending the ladder.
•
•
Ensure both ladder feet rest firmly on the floor before climbing the ladder.
Inspect the ladder before climbing (see above) – do not use if damaged.
•
•
Only wear suitable footwear whenever ascending or descending the ladder.
•
Maintain 3 points of contact by gripping the handrail or ladder stiles when ascending or descending.
•
Do not overload the ladder by carrying heavy objects.
•
Take care when carrying awkward shaped objects up and down the ladder.
Keep a firm grip on anything being carried to prevent the object falling.
•
•
Only ascend and descend the ladder by facing the treads.
Never exit the ladder by stepping away from the treads.
•
•
Ensure the trapdoor is securely locked after use.
Care & Maintenance
01
Repair & Maintenance
•
Repairs and maintenance shall be carried out by a competent person and be in accordance with these
instructions. NOTE: A competent person is someone who has the skills to carry out repairs or maintenance,
eg. trained by the manufacturer.
•
For repair and replacement of parts, e.g. feet, springs and hooks, contact your supplier or distributor.
•
Ladders shall always be operated in accordance with the producer's instructions.
•
Timber loft ladder stiles and treads should not be painted or varnished.
•
Periodically lubricate all moving parts with light oil.
•
Periodically clean all timber parts to prevent the build-up of dirt, grease and other contaminants.
02
Traceability
For traceability purpose it can be identified by the barcode (EAN) number and also manufacturing date or serial
number, these can be found on the trapdoor.
14
Publicité
