Led Indicators; Setting Operation - Furrion net-zero FSPP95SA-BL Manuel D'instructions

Operation

LED Indicators

Indicator
Charging (green) and battery indicator (orange)
flashing simultaneously

Setting Operation

Button function - The controller parameters can be set via the button:
Mode Note
Clear error Press the button
Browse Press the button and hold for 5 seconds until the digital tube turns on. Press
mode the button to roll the item in circle.
Press the button to roll the item in the browse mode and hold on 5 seconds to
Parameter
enter edit parameters with the LED2 flashing. Modify the value by pressing the
set mode
button. Save the data and return to the menu until the LED2 stops flashing.
11
Color Status
Green Solid
Green Slowly Flashing (1Hz)
Green Fast Flashing (4Hz)
Green OFF
Green Solid
Green Slowly Flashing (1Hz)
Green Fast Flashing (4Hz)
Orange Solid
Red Solid
Red Fast Flashing (4Hz)
Red Solid
Red OFF
LED1
LED2
Instruction
PV connection normal but low voltage
(irradiance) from PV, no charging
In charging
PV reverse polarity
No PV voltage (night time) or PV
connection problem
Normal
Full
Over voltage
Under voltage
Over discharged
Battery Overheating
Load ON
Load OFF
Controller overheating
Button
Radix point