Publicité
Les langues disponibles
Les langues disponibles
Cleaning
1. Keep your machine clean, the outside of the machine can be cleaned using a damp soft
cloth with a mild detergent if required, never use water to clean the machine as it may cause
damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts, these include
products containing benzene. Trichloroethylene, chloride and ammonia.
3. Take special care to keep the ventilation inlets /outlets free from obstruction. Cleaning with a
soft brush followed by a compressed air jet will usually be sufficient to ensure acceptable
internal cleanliness.
4. Wear eye protection when carrying out cleaning.
Repairs
Only an authorized service center should repair the machine.
Problem
Check
Fuel at the
carburetor
The engine
stalls, is
difficult to
start or
does not
start
Fuel at the
cylinder
GB
Condition
The fuel does not
arrive at the
carburetor
The fuel does not
arrive at the
cylinder
There is fuel in
the exhaust
29
Cause
Fuel filter blocked
Fuel supply
blocked
Carburetor
Carburetor
The fuel mixture is
too rich
Solution
Clean or replace
Clean or replace
Ask your distributor for
advice
Ask your distributor for
advice
Open the throttle valve
Clean or replace the air
filter
Adjust the carburetor
Ask your distributor for
advice
Publicité
