SAS RM-MT330-2 Manuel D'utilisation page 44

1 Spark plug
2 Choke lever
3 Fuel tank cap
4 Fuel tank
5 Primer bulb
6 Actuating handle
7 Air filter cover
8
Fuel mixture bottle
9 Harness
10 Suspension point
ASSEMBLY
WARNING!
Please ensure that the brush cutter is switched off properly and that the engine has stopped
completely before assembly and adjustment.
Assembly of the ha ndl e
1.Remove the screws in fixing device and remove the front cover.
2. Place the handle in position and assembly the front cover.
11 Trimmer head
12 Blade
13 Guard
14 Multi-function screwdriver
15 Socket spanner
16 S4 Allen key(4mm)
17 S5 Allen key(5mm)
18 Wrench
19 Locking knob
20 Throttle trigger
GB
21 Throttle trigger lock
22 Ignition switch
23 Throttle interlock
24 Backing flange
25 Locking flange
26 Flange cover
27 Nut
28 Cutting line
13