SAS RM-MT330-2 Manuel D'utilisation page 40

 turn off the engine, wait for the cutting device to stop and disconnect the spark
plug cap;
 fit the cutting device guard;
 use protective gloves when handling the blades;
 Keep the blade protection device on;
 only hold the machine using the hand grips and position the cutting device in the
opposite direction to that used during operation.
b) when using a vehicle to transport the machine, position it so that it can cause no
danger to persons and fasten it firmly in place to avoid it from tipping over, which may
cause damage or fuel spillage.
INTENDED USE
This unit is designed to be used in accordance with the descriptions and safety instructions
indicated in this operating manual
- for private use
- for trimming lawn edges and small in accessible areas of grass(e.g.underbushes)
- for cutting wild growth,shrubs and undergrowth.
It is not permitted to use this unit for any other purposes.
The user is liable for all injuries to third parties and damage to their property.
Operate the unit only in the technical condition as stipulated and delivered by the manufacturer.
Arbitrary changes to the unit will exclude the manufacturer from any liability for resulting injury
and/or damage.
TECHNICALSPECIFICATIONS
Model
Equipment mobility
Unit mass(empty tanks without cutting
attachment)
Volumes of fuel tank
Engine model
GB
RM-MT330-2
Hand-held
6,8kg
900cm³
1E36F
9