Publicité
Les langues disponibles
Les langues disponibles
TELE Sytem
6 Basic Function
6.1 Power / Standby
While the TV is in operation, to turn it off, press the Power button on your remote
control. The LED on the front panel of the TV will change from green to red.
To switch the TV on again, press the Power button (on the remote control or on the
TV).
6.2 Program selection
To select a program, press the P+/P- buttons or use the numeric keys for direct channel
selection.
6.3 Volume regulation
Press the V- / V+ buttons on the standard remote control to increase / decrease the
volume.
6.4 Mute (temporary)
Pressing the MUTE button, the sound is stopped and the video shows the symbol of
the function. To reactivate the sound, you can press the MUTE button again or one of
the volume buttons V- / V +.
6.5 Program recall
You can recall the previously selected program by pressing the BACK button and by
pressed it again, it returns to the program you were watching.
6.6 Source selection
By pressing the Source button, you can select the TV mode:
DTV: To activate the Digital TV mode and allow the reception of digital TV programs;
AV: to enable the AV input (RCA)
HDMI: to activate the HDMI input.
PC: to activate the PC mode
USB: to access content loaded on a USB memory. (See Chapter 16)
10
Publicité
