Publicité
Les langues disponibles
Les langues disponibles
4.3 Inserting batteries
You have to replace or install the batteries when:
•
You buy the product.
•
the remote control does not work properly.
Once you open the battery door located on the back of the remote, insert the 2
batteries (AAA) in the compartment, making sure to respect the correct polarity as
indicated.
Remove the used batteries, which must be disposed of separately from household
waste taking them to any store or collection point and then repeat the operations for
insertion.
To avoid damaging the remote control with the leakage of corrosive liquid, you should
remove the batteries if you plan not to use the device for a long period of time. Avoid
using different types of batteries or dead and new batteries at the same time.
5 PC Mode
Since it is equipped with a VGA video card, the TV can be used as a PC screen following
this procedure:
With the equipment turned off, connect the two devices via a D-SUB cable (15-pin) for
the Video part and an audio cable for the audio portion. Reset the electrical connection
of the TV and PC. Turn on the TV and from your remote control, press the AV button.
Select the PC mode. Turn your computer on.
5.1 Menu for PC mode
After switching to PC mode, you can adjust various settings by pressing the MENU
button on the front panel or the remote control: the usual menu will appear, which will
have some functions active only in this mode: to navigate through the menu use the ▲
/ ▼ keys . Change the values using the t / u buttons.
ENGLISH
9
Publicité
