WARNING
Do not clean the cooktop while it is in operation.
NOTICE:
Humidity might enter the appliance interior, if you remove
the control knobs during cleaning. This may damage the
appliance.
Do not remove the control knobs when cleaning the
▶
appliance.
Let the appliance cool down.
1.
Clean with a sponge, water and soap.
2.
Dry with a soft cloth.
3.
9.2 Cleaning the burners
Clean the surfaces of the burners after every use to
prevent them from becoming encrusted.
NOTICE:
Do not clean the burner parts in the dishwasher. They may
be damaged.
9.4 Cleaning recommendations
Follow these cleaning recommendations for the individual parts of your appliance.
Part / Material
Suitable cleaning method
Burner base /
¡ Non-abrasive cleaner: Dish soap and hot
aluminum alloy
¡ Mild abrasive cleaners: Bon Ami®
Rinse and dry immediately.
Burner cap / porcelain
¡ Non-abrasive cleaners: Dish soap and hot
enamel
¡ Mild abrasive cleaners: Bon Ami®
¡ Liquid cleaners: Soft Scrub®
¡ For food stains: abrasive cleaners such as
Rinse and dry immediately.
1
These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home
Appliances Corporation or its affiliated companies.
water
1
Scrub®
water, Fantastic®
1
Barkeepers Friend®
1
Wait until the appliance has cooled.
1.
Scrub with a non-metallic brush and soapy water.
2.
Dry the burners completely. If there are water droplets
3.
or damp patches on the cooktop when you start
cooking, the enamel may be damaged.
Reassemble the burner parts. Ensure that the burner
4.
caps are correctly positioned on the burner bases.
→ "Burner cap and burner base placement", Page 11
9.3 Cleaning the burner grates
Wait until the appliance has cooled.
1.
Carefully lift off the burner grates.
2.
Scrub with a non-metallic brush and soapy water.
3.
Carefully clean around the rubber feet. If the rubber feet
come off, the grates may scratch the cooktop surface.
Dry the burners grates completely. If there are water
4.
droplets or damp patches on the cooktop when you
start cooking, the enamel may be damaged.
Place the burner grates in their proper position.
5.
→ "Burner grates", Page 12
Important notes
¡ Do not scratch or gouge the port openings.
¡ Clean ports with a wire or a straightened
1
or Soft
paper clip.
¡ Do not use a toothpick, it may break off.
¡ Do not soak burner bases.
¡ A toothbrush can be used for stubborn
stains.
¡ Acidic and sugar-laden spills deteriorate the
enamel. Remove soil immediately after the
1
appliance has cooled enough to touch.
1
¡ Do not use wet sponge or towel on hot
porcelain.
¡ Do not soak burner caps.
¡ Always apply minimal pressure with abrasive
cleaners.
¡ Dry thoroughly and make sure the burner
cap is seated properly on the burner base
after cleaning.
Cleaning and maintenance en-us
17