Télécharger Imprimer la page

GreenWorks Pro GLM801600 Manuel D'opérateur page 13

Publicité

Les langues disponibles

Les langues disponibles

Problem
Possible cause
The machine does
The battery ca-
not start.
pacity is low.
The bail switch is
defective.
The battery key is
not put in.
The machine cuts
The lawn is rough. Examine the mow-
grass unevenly.
The blade height is
not set correctly.
The machine does
Wet grass clip-
not mulch correct-
pings attach to the
ly.
deck.
The mulch plug is
missing.
The machine is
The grass is too
hard to push.
tall, or the blade
height is too low.
The grass catcher
and the blade
drags in thick
grass.
There is a high vi-
The blade is un-
bration in the ma-
balanced and
chine.
worn.
The motor shaft is
bent.
The machine stops
The blade height is
during mowing.
too low.
The battery pack is
out of power.
The grass clip-
pings attach to the
deck or the blade.
Operation temper-
ature of the ma-
chine is too high.
English
* If you cannot find the solution to these problems, go to the
Solution
service center.
Charge the battery
pack.
11
Replace the bail
Voltage
switch.
Put in the battery
No load speed
key.
Deck Size
Height adjustments
ing area.
Functions
Move the wheels
to a higher posi-
tion.
Weight (without bat-
tery pack)
Wait until the
grass dries before
Battery model
mowing.
Install the mulch
Charger model
plug.
Double insulated con-
Increase the blade
struction
height.
12
Empty the grass
clippings from the
grass catcher.
Replace the blade.
1. Stop the mo-
tor.
2. Remove the
Greenworks hereby warranties this product, to the original
safety key and
purchaser with proof of purchase, for a period of four (4)
battery pack.
years against defects in materials, parts or workmanship.
3. Disconnect the
Greenworks, at its own discretion will repair or replace any
power source.
and all parts found to be defective, through normal use, free
4. Inspect for
of charge to the customer. This warranty is valid only for
damage.
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
5. Repair the ma-
have been maintained in accordance with the instructions in
chine before
the owners' manual supplied with the product from new.
you start it
again.
Increase the blade
ITEMS NOT COVERED BY WARRANTY:
height.
1. Any part that has become inoperative due to misuse,
Charge the battery
pack.
2. The unit, if it has not been operated and/or maintained in
Remove the bat-
tery pack and
3. Normal wear, except as noted below;
check the deck.
4. Routine maintenance items such as lubricants, blade
Cool the machine.
5. Normal deterioration of the exterior finish due to use or
13
TECHNICAL DATA
80 V
2800 RPM
21"
1 3/8 - 3 3/4" (3.5 - 9.5) cm
3-in-1Rear bag & Side Discharge
& Mulch
25.5 kg (56.2 lbs)
2954802 (BAB726) and other BAB
series
2901402 and other CAB series
LIMITED WARRANTY
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
accordance with the owner's manual; or
sharpening;
exposure.
EN

Publicité

loading

Ce manuel est également adapté pour:

Lmb401