Publicité
Les langues disponibles
Les langues disponibles
EN
Service
• Have your power tool serviced by qualified repair person using only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service
providers.
• When servicing a tool, use only genuine Ingersoll Rand replacement parts and follow all Maintenance Instructions. Use of
unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.
• Do not dispose of batteries in fire, incinerate or heat above 100° C (212° F). Batteries present a risk of fire or chemical burn if mistreated.
• Responsibly recycle or dispose of batteries in accordance with all applicable standards and regulations (local, state, country, federal,
etc.). Improper disposal may endanger the environment.
Product Specific Safety Rules
• Hold tool by insulating gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact
with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.
• For reversible models, note the position of the reversing mechanism before operating. Knowledge of the direction of rotation helps in
maintaining control of the tool.
• Use only impact sockets and accessories. Do not use hand (chrome) sockets or accessories. They may break in use and cause injury.
• Periodically check the drive end of the tool to make certain that the socket retainer functions correctly, and that sockets and drive
ends are not excessively worn. Either condition may allow the socket to come off when rotating.
• Impact Wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting
with an impact wrench. Improperly torqued fasteners may loosen and cause injury.
• Exposed throttles shall not be used where obstructions can hold the throttle in the "on" position. You may not be able to turn the tool
off.
• Do not shine the beam into the eyes of a person or animal. Bright light may injure eyes.
Refer to Product Information Manual for Model Specific Safety Information.
Safety Symbol Identification
Risk of explosion.
Follow all safety
procedures for use.
(Dwg. 16589525)
Safety Information - Explanation of Safety Signal Words
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
CAUTION
property damage.
Indicates information or a company policy that relates directly or indirectly to the safety of personnel or
NOTICE
protection of property.
Product Safety Information: Battery
Product Description
A Battery is an electric energy storage device used as the power source for Ingersoll Rand Cordless Products.
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
EN-3
WARNING
NOTICE
Wear Eye
Wear Hearing
Protection
Protection
WARNING
Read Manuals Before
Operating Product
47631617001_ed6
Publicité
