MSI FUZION Serie Mode D'emploi page 18

▍
MS-7582 Manboard
9. Algn the holes on the manboard wth
the heatsnk. Push down the cooler
untl ts four clps get wedged nto the
holes of the manboard.
11. Turn over the manboard to confirm
that the clp-ends are correctly n-
serted.
Manboard
Important
• Read the CPU status n BIOS.
• Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc
cap covered (shown n Fgure 1) to avod damagng.
Manboard photos shown n ths secton are for demonstraton of the CPU/ cooler n-
•
stallaton only. The appearance of your manboard may vary dependng on the model
you purchase.
• Please refer to the documentaton n the CPU fan package for more detals about the
CPU fan nstallaton.
En-8
Hook
10. Press the four hooks down to fasten
the cooler.
12. Fnally, attach the CPU Fan cable to
the CPU fan connector on the man-
board.