Assembly Instruction
1. Unfold the product in its entirety as the picture shows.
Take out the
Roll the
product and
product
expand it
2. Place the blower (air pump) where
it will not inhale dust or leaves, and
keep the blower (air pump) and
power cord away from children and
water. Note: Please make sure the
power supply is safe and reliable.
During use, the blower (air pump)
should remain on and continue to
inflate. After stretching the air pipe,
position the blower (air pump) at the
end of the air pipe. Wind one end of
the tube around the blower (air
pump), blow out the air after tying.
The inflation tube should be straight
and not twisted. If necessary, adjust
the position of the blower (air pump).
Then use ground piles to firmly fix
the blower (air pump) on the ground.
06
Open the
Fully expand
product
the product
3. Please fix the product correctly, and
be sure to fix the product with ground
stakes before use. In order to prevent
overturning during the game, please
push the pile firmly into the ground, and
regularly check whether the ground pile
is firm. Ground piles should be flush with
the ground or buried in the ground to
reduce the risk of tripping. Please
ensure that the product is fully inflated
before children enter the playground.
Using this product when inflated or
excessively deflated may cause product instability and may cause
serious injury. Since the product is kept inflated by a constant air
flow, air leakage from the joint is normal and necessary, so the
product will not over-expand.
Maintenance Instruction
Wrong
The product shall be accompanied by maintenance instructions
that draw attention to the need for regular inspection and
maintenance of major components (beams, hangers, anchors,
etc.) and that if these inspections are not carried out, the product
may tip over or otherwise become a hazard. Sometimes
maintenance instructions should also include the following
recommendations, noting that it is especially important to follow
Right
07