Sirena EL-7L Manuel page 6

WIRING AND POWER SUPPLY
For the power supply we recommend using a shielded cable with a minimum AWG section
in relation to the absorptions present in the technical data table and the number of EL-7Ls
connected.
LIGHTING EFFECTS
The choice of light e ects can be made by connecting to the EL-7L via NFC, using the dedicated
application to be installed on the mobile phone.
The available e ects are:
Fixed light - Single flash (Fpm 85) - Double flash (Fpm 2Fx80) - Strobe - Triple flash (Fpm 3Fx42)
SETTING THROUGH THE APPLICATION
Through the "MySirena" application to be installed on devices with iOS and Android systems, it is
possible to set the desired lighting e ect and the flashing mode.
The application can be downloaded from the links:
iOS: https://apps.apple.com/app/mysirena/id1671784900
Android: https://play.google.com/store/apps/details?id=com.mysirena.app&gl=IT
or via the QR below.
N.B.: the application can only be used with phones with an integrated NFC reader.
A er opening the application and selecting the EL-7L product, it will be possible to read or save a new
light configuration by placing the phone in the area where the NFC writing is present.
P1IN: Power input terminal
P1OUT: Power output terminal (for series connection)
NFC Freq.:13,56Mhz
N.B.: For more information, consult the tutorial within the
application.
P1IN
P1OUT
VIN: supply voltage (+)
SYNC: synchronism
GND: supply voltage (-)
MySirena