Publicité
Les langues disponibles
Les langues disponibles
Warning
Ensure that there are no metal parts
(for example, metal plate for magnetic
holder) on the back of your terminal
device. Metal may heat up signi cantly
in the eld of the induction charger,
causing damage to your terminal device
and/or the charger.
4. Getting Started and Operation
Note
• To be able to charge your terminal
device using the wireless charger, your
terminal device must be compatible
with inductive charging technology.
Please read the operating instructions
of your device.
• Note that the presence of mobile
phone cases, covers or other materials
between the wireless charger and
the back of your terminal device
can interfere with charging or even
prevent it.
• Connect the included QC 3.0 charger
(B) to a power socket.
• Connect the included Micro-USB cable to
the Micro-USB input (2) on the wireless
charger and to the USB-A output of the
QC 3.0 charger (3).
• When the power supply is active, the
status LED (1) lights up.
Warning
• Only use suitable charging devices or
USB connections for charging.
• As a rule, do not use charging devices
or USB connections that are defective
and do not try to repair them yourself.
• Put your terminal device on the wireless
charger (B) with the back to the charger.
Warnung
• Connect the product only to a socket
that has been approved for the
device. The socket must be installed
close to the product and must be
easily accessible.
• Do not continue to operate the device
if it becomes visibly damaged.
• Charging starts as soon as an effective
induction eld has been generated. The
status LED (1) begins to ash. The
current charging status appears on your
terminal device.
• If no connection can be established
through induction, you may have to
change the position of your terminal
device (B).
• Charging stops automatically once your
device's battery is fully charged.
• Remove your terminal device from the
wireless charger and disconnect the QC
3.0 charger from the power socket.
3
Publicité
