Publicité
Les langues disponibles
Les langues disponibles
6. MAINTENANCE AND STORAGE
Keep your tool on a regular basis. This will keep your tool in good working order and extend its lifespan.
Do not use abrasive or corrosive agents to clean the tool. These types of products damage your tool.
Do not make any repairs by yourself. Repairs and inspections should be carried out by a competent person
or an authorized service center (please contact your dealer).
a. After each use
Check the condition of the accessories and the tool body (cleanliness, wear, damage, etc.). If you notice
any damage, wear or malfunction, do not use the tool and take it to a qualified service for inspection and
repair.
b. Carbon brushes
Remove the carbon brush holders and clean the carbon brushes.
In case of wear, replace both carbon brushes at the same time.
Mount the carbon brush holders.
After mounting new carbon brushes, let the machine run at no load for 15 minutes.
c. Servicing
No specific maintenance is required by the user. After each season, please bring the tool to an authorized
service center for general machine maintenance.
d. Spare parts
You can order spare parts directly from our service center. Please place your order according to the type of
machine and the part number indicated in the explosion drawing.
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord available
through the service organization.
e. Storage
-
When transporting and storing, always put the protective cover on the blade.
-
Avoid exposing the tool to direct sunlight.
-
Always store the product and accessories in a dark, dry, frost-free, well-ventilated place.
-
Always store the product in a place that is not in accessible to children. The ideal storage
temperature is between 15
f. transportation
-
Switch the product off and disconnect it from the power supply.
-
Attach transportation guards, if applicable.
-
Always carry the product by its main handle.
-
Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
-
Secure the product to prevent it from slipping or falling over.
7. DISPOSAL
Electrical products should not be discarded with household products. According to the European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into
national law, electrical products used must be collected separately and disposed of at collection
points provided for this purpose. Talk with your local authorities or dealer for advice on recycling.
C to 35
C
o
o
24
Publicité
