In order to simplify the handling of the GLOBEline/GLOBEline comfort, we have created a brief
summary of the functions for you.
1
Kinematic
Pull up the left lever underneath the seat: ad-
justment (in 3 positions). Press down the le-
ver: release of the synchronous mechanism for
dynamic seating.
2
Seat height adjustment
To raise or lower the height of the seat on an infi-
nitely variable scale, pull adjustment lever on the
right side underneath the seat upwards.
Caution! The pneumatic springs should be repaired
or replaced by trained personnel only.
3
Seat depth adjustment (optional)
Hold down the front lever underneath the seat and
move the seat with your bottom into the desired
position (7 positions are possible).
4
Seat inclination adjustment (optional)
Press the lever on the rear left side underneath
the seat and adjust negative seat inclination (− 3°).
5
Weight adjustment
The weight adjustment regulator is located to the
front beneath the seat. Pull it outwards in order to
adjust the weight. To obtain a lighter setting, turn
the lever to the desired direction: (−) the mecha-
nism becomes lighter. Turning forward (+) tightens
the mechanism.
Armrest adjustments
6
2-D-Armrest (option): Push the button on the outside
of the armrest to adjust the height (11 positions)
of the armrests. To set the width of the armrests:
loosen the lever, move the armrests into the desired
position, and tighten the lever.
3-D-Armrest (option): Push the button to adjust the
height (8 positions) of the armrests. To set the width
of the armrests: loosen the lever, move the arm-
rests into the desired position, and tighten the lever.
By lifting and pushing the armrest pads to the left
or to the right, they can be rotated in 3 positions.
4-D-Armrest (option): Push the button to adjust the
height (7 positions) of the armrests. To set the width
of the armrests: loosen the lever, move the arm-
rests into the desired position, and tighten the le-
ver. By lifting and pushing the armrest pads to the
left or to the right, they can be rotated in 3 posi-
tions. The armrest support can be pushed to eas-
ily adjust its depth.
7
Depth adjustable lumbar support (option)
If your chair has a depth-adjustable lumbar support:
You can set the depth of the lumbar support by
turning the knob on the right beneath the backrest.
8
Backrest height adjustment
Hold down the button on the lower right of the
backrest and move the backrest into desired po-
sition (70 mm travel – 7 locking positions). To lock
the backrest, release the button.
9
Height adjustable and tiltable neckrest
(option)
You can adjust the height of the neckrest by moving
it upwards or downwards. To set the angle, move
the pad to the required position.
10
Castors
Castors as per DIN EN 12 5 29 – with load con-
trolled braking mechanism.
For textile floors: the wheels of the castors are uni-
coloured over the whole surface.
For hard floors: the soft tread of the wheel is of a
different colour.
Cleaning
Upholstery parts can be cleaned by means of the
appropriate commercial detergents for upholstery.
Considerations for use
Only use this office swivel chair conventionally by
respecting the general duty of care. Danger of ac-
cident exists in the case of use as an ascent as-
sistance, sitting on armrests or other improper use.
EN