TDK-Lambda HWS300 Manuel D'installation page 15

1. Model name identification method
HWS 300 – – – – 5 / HWS 300 HWS 300 HWS 300
2. Terminal Explanation
Please pay extra attention to the wiring. Incorrect connection will damage the power supply.
2-1. Front Panel Explanation
HWS300 HWS HWS HWS 300 300 300
①
②
③
④
⑤
⑥
① V.ADJ : Output voltage adjustment trimmer.
(The output voltage rises when a trimmer is turned clockwise.)
② ON : Output (Power On) indication LED
(The indicator turns on when the power supply output is in normal operating condition.)
③ CN1, CN2 : Remote sensing, ON/OFF control signal, Current balance signal, Power fail signal,
Output voltage external control signal. (Refer to 2-2.)
④ : Protective Earth (Frame ground), M4 screw.
⑤ AC input terminal L : Live Line (Fuse in line), M4 screw.
⑥ AC input terminal N : Neutral line, M4 screw.
⑦ + : + Output terminal
(HWS300: M4 screw x 2 / HWS600: M5 screw x 2)
⑧ - : - Output terminal
(HWS300: M4 screw x 2 / HWS600: M5 screw x 2)
5 / □ 5 / 5 /
Option (*1)
Rated Output Voltage
Output Power type
Series name
⑦
⑧
- 1 -
TDK-Lambda
HWS300 - 600 Series
INSTRUCTION MANUAL
(*1)
/ "No assigned" : Standard type
/PV : Output voltage can be contorled
by external voltage.
(Only 12 – 48V output model)
HWS HWS600 HWS HWS 600 600 600
⑦
②
①
③
⑧
④ ⑤ ⑥