Functional Description; Installing The Alignment Jig En - Abicor Binzel WH Mode D'emploi

5 Functional Description

Goods-in
inspection
In case of
complaints
Packaging for
returns
Tab. 5
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for shipment and storage on page EN-4
5 Functional Description
The torch neck to be tested is clamped into the clamping body according to the bending angle. After a
collision, the torch neck can be realigned slightly by means of the adjusting lever.
Danger of crushing
Parts of the body can be crushed between the torch neck and the guide device when aligning the torch
neck during normal operation.
• Keep out of the danger zone.
5.1 Installing the alignment jig
NOTICE
• To allow the alignment jig to be screwed on free from distortion surface, the installation surface must
EN - 6
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last carrier
immediately. Retain the packaging for potential inspection by the carrier.
Where possible, use the original packaging and the original packaging material.
If you have any questions about the packaging and/or how to secure an item
during shipment, please consult your supplier.
Transport
WARNING
be flat.
Alignment jig
BAL.0022 • 2017-02-15