Publicité
Step 19
Pull the BRACKETS
1
apart and slide
them into the
DRAWER SIDE
grooves.
R2
Groove
D34
å
Pull the PENCIL DRAWER FRONT BRACKETS (6G) apart and
slide them into the grooves in the PENCIL DRAWER SIDES (D34
and D35).
å
NOTE: The PENCIL DRAWER FRONT BRACKETS are marked
"RH" and "LH" for easy identifi cation.
å
Fasten the PENCIL DRAWER FRONT (R2) to the PENCIL
DRAWER FRONT BRACKETS (6G). Use two BROWN 9/16"
LARGE HEAD SCREWS (40S).
3
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M67) to the PENCIL
å
DRAWER FRONT (R2). Tighten the HIDDEN CAM.
Page 26
Push down
6G
6G
D35
BROWN 9/16" LARGE HEAD SCREW
(2 used in this step)
1
2
Hidden part using
recycled material.
Color may vary.
M67
R2
VIEW THE T-SLOT BOX VIDEO
2
D34
40S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the LARGE DRAWER BOTTOM (D991) into
å
the grooves in the PENCIL DRAWER SIDES (D34
and D35) and PENCIL DRAWER FRONT (R2).
4
D34
Fasten the PENCIL DRAWER BACK (D121) to the
å
PENCIL DRAWER SIDES (D34 and D35) and
DRAWER BRACE (M67). Use fi ve BLACK 1-9/16"
FLAT HEAD SCREWS (30S).
412920
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n fi
n i s h
e d
s u r
D991
f a c
e
R2
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
D121
M67
D991
D35
www.sauder.com/services
D35
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Publicité
