Publicité
Step 7
First, fi ll the holes in one edge of the UPPER LEFT END (B)
å
1/4 to 1/2 full with GLUE (54M). Then, insert the WOOD
DOWELS (15F) into the holes. Wipe away the
excess GLUE.
Repeat adding GLUE and inserting the WOODEN
å
DOWELS in the short edges of the LOWER LEFT END (C)
and BRACE (I) as shown below.
Now, fasten the BRACE (I) to UPPER LEFT END (B). Use
å
two SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Edge with HIDDEN CAMS
+
15F
54M
Page 12
SILVER 1-1/8" FLAT HEAD SCREW
(2 used in this step)
I
B
The holes should be
closer to this edge.
10S
Fill the holes 1/4 to 1/2 full with GLUE.
C
412920
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
(8 used)
15F
+
54M
www.sauder.com/services
Publicité
