Publicité
Les langues disponibles
Les langues disponibles
Outer fabric : 100% PU-coated polyester
Conforms to standards
EN ISO 13688:2013+A1:2021
EN 343:2019
EN ISO 20471:2013+A1:2016
Key to care symbols :
Handwash only
Do not use chlorine bleach
Do not iron
Do not dry clean
Do not tumble dry
X
EN ISO 20471:2013+A1:2016
High visibility clothing
EN ISO 20471:2013+A1:2016
Fluorescent
Area m²
material
Class 3
0.80
Class 2
0.50
Class 1
0.14
EN 343 :2019
X Indicates resistance to water penetration (1 to 4, see label)
Penetration
resistance in
water
Test to be
1
performed
Before
WP
pretreatment
≥ 8 000 Pa
After each
No test
pretreatment
Seams before
WP
pretreatment
≥ 8 000 Pa
Seams after
pretreatment
No test
by cleaning
NOTE 1 000 [Pa] about 102 [mmH2O]
Y Indicates the water vapour resistance
(1 to 4, see label)
Resistance
evaporative
1
Ret
Ret
(m² Pa/W)
> 40 min
EN 343:2019
Protective clothing
against rain
Retroreflective
Combination
material
material
0.20
0.13
0.10
0.20
Class
2
3
No test
No test
WP
WP
≥ 13 000
≥ 8 000 Pa
Pa
WP
WP
≥ 13 000
≥ 8 000 Pa
Pa
No test
No test
Class
2
3
15 < Ret
15 < Ret
≤ 25 min
≤ 25 min
≤ 15 min
U S E R I N S T R U C T I O N S
If water vapour resistance class is 1, wearing time is restricted
according to following table:
Temperature
of working
environment ºC
Wearing time (min)
R Indicates Readymade garment rain tower test, optional
(replaced with 'x' when not been tested).
APPLICATIONS :
This clothing is worn to indicate the wearer's presence under
any daytime light conditions and under the illumination of
headlights in the dark.
INSTRUCTIONS FOR USE :
Remove the garments from their packaging.
The trousers must be worn so that the retroreflective bands
are visible and no part of them is masked by other clothing.
X
They must be worn with their fastenings closed. The garments
must not be worn next to the skin.
Y
CARE :
To retain its visibility properties, it is important for this
personal protective equipment to be kept clean. To maintain
its performance, the washing instructions for the garments
must be followed. Material testing was carried after 5 pre-
treatments in accordance with the requirement standard.
The touch and close fastenings must be closed for washing.
Turn the garments inside out for washing.
The maximum number of cleaning cycles stated is not the
only factor affecting the durability of the garments.
-
Their durability also depends on their use, care, storage
-
conditions, etc.
WARNING :
Tears or holes in the material can reduce the visible surface.
The garments should be checked regularly. They must be
replaced if damaged.
They must also be replaced if the colour has faded. Markings
or logos can reduce the reflective surface so the trousers no
longer comply with the standard: consult us before making
4
such changes. If the garments are cut or shortened they will
no longer comply.
No test
Mud or other stains must be removed immediately.
WP
≥ 20 000
STORAGE :
Pa
The trousers must be stored in their original packaging in a
clean, dry, well-ventilated place, away from light.
No test
It is recommended to use the trousers within five years of
their purchase date.
WP
≥ 20 000
Pa
This item meets the essential requirements of regulation
4
Ret
HAYLEY, Shelah Road, Halesowen,
25C°
20C°
60
75
(EU) 2016/425.
It has undergone CE type-testing
by the notified body :
SGS Fimko Ltd
Takomotie 8
00380 Helsinki Finland
NB 0598
The UK contact information:
West Midlands B63 3XL
United Kingdom
G B
15C°
10C°
5C°
100
240
-
Publicité
