Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS (CONT.):
4. Wrap all wire connections with electrical tape for a more secure connection.
Note: If you have electrical questions, consult your local electrical code for
approved grounding methods.
5. Slide the Base (#16) onto the Anchors (#31). (Fig. 12)
6. Slide a Flat Washer (#36) and a Lock Washer (#37) (in that order) onto each
Anchor (#31). Thread a Hex Nut (#38) onto each Anchor (#31) to secure the
Base to the ground. (Fig. 12)
7. Proceed to Step 12 of the Assembly Instructions.
8. Installation is complete. Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Page 11
Publicité
