WaterLink SpinTouchFF Manuel D'instruction page 2

SETUP
BEFORE FIRST USE
¬ Fully charge battery using the Spin Touch USB cable and adapter plug in AC outlet.
¬ Ensure your Spin Touch has latest firmware. A USB connection to a Windows
required:
1. Download and install WaterLink Connect 2 Application for Windows at
lamotte.com. Select WaterLink Connect 2 Software for Windows FREE Download.
2. Plug meter into the computer with the provided USB cable and launch WaterLink Connect
2 Application from the Start Menu.
3. A prompt will appear if firmware updates are available. Select Update. Testing and data
transfer will not be possible until firmware has been updated.
METER
1. The meter can be powered from an AC outlet, a computer or the internal battery.
2. Use the USB cable and the adapter to plug the meter into an AC outlet.
3. Use the USB cable to connect the meter to the USB port of a computer.
CHARGE THE BATTERY
1. Use the USB cable and the adapter to plug the meter into an AC outlet or use the USB cable
(included) with a car charger (not included) to charge the battery. (Anker PowerDrive 2, DC
12/24V, 5V = 4.8A, Part Number A2310 recommended.)
2. The battery icon on the screen will show the battery status. Charge the battery until the
battery indicator is full.
FIRMWARE UPDATES Occasionally, the firmware in the Spin Touch will require updates. A USB
connection to a Windows PC is required. To do so:
1. Visit softwarecenter.lamotte.com
Windows.
2. Plug the Spin Touch into the computer using the included USB cable.
3. Open the WaterLink Connect 2 desktop application and wait for the update to complete.
Once the update is complete, it is safe to close WaterLink Connect 2 and unplug the lab. After
updating firmware it is recommended that the LED and Calibration Procedure be performed.
NOTE: When a prompt to update the firmware is received, the options Update Now or Remind
Me Later will be displayed. If Remind Me Later is chosen, the update prompt will be displayed
again in 23 hours. Or, to update the firmware at any time, open WaterLink Connect 2, go to
Settings>Service Settings>Get Updates.
PC CONNECTION When the WaterLink Spin Touch is connected to a computer via USB,
the onboard touchscreen becomes disabled and operation of the lab is performed using
the WaterLink Connect 2 application for Windows. This application is available for free at
softwarecenter.lamotte.com. Via the WaterLink Connect 2 desktop application, results from the
Spin Touch can be transferred to a water analysis program such as WaterLink Solutions
DEVICE CONNECTION
(over USB) and to Android and iOS mobile devices (via Bluetooth).
CONNECTING VIA USB Using the provided USB cable, the WaterLink Spin Touch can be
connected to a Windows based PC. Before connecting a meter via USB, download and install the
free WaterLink Connect 2 Windows application from softwarecenter.lamotte.com. When the
WaterLink Spin Touch is connected to the PC via USB, the onboard touch screen controls will be
disabled and operation of the meter is performed using the WaterLink Connect 2 application.
LaMotte offers robust water analysis programs as well, such as WaterLink Solutions, to collect
test results and offer detailed treatment recommendations. Learn more about LaMotte software
products at softwarecenter.lamotte.com.
CONNECTING VIA BLUETOOTH The WaterLink Spin Touch is capable of connecting to a Bluetooth
enabled device, such as a phone or tablet. The Spin Touch is also compatible with a BLE Mobile
Printer (5-0067). Other Bluetooth printers are not supported. It is not necessary to pair the
Spin Touch to the Bluetooth enabled device. Barriers to wireless signals can reduce the range of
wireless devices. The WaterLink Spin Touch will work best if there are no walls between it and the
and download the WaterLink Connect 2 application for
The WaterLink Spin Touch supports connections to a Windows based PC
2
® PC is
softwarecenter.
™ .