Eaton TRIPP LITE Serie Manuel Du Propriétaire page 6

3. Installation
2. Remove the top cover of the module.
Note: 24 pcs. of LC pigtail have been preloaded into the module.
3. Splice the pigtail with drop cable.
After the trunk cable, connect with the module. The fanout of the trunk cable
should be attached to the shelf with the included nylon cable ties. Make sure
there is enough cable slack so the module can move back and forth freely. Also
make sure the cable is not intertwined.
6
03-493-9347A1_revA.indb 6 03-493-9347A1_revA.indb 6 1/4/2024 10:48:21 AM 1/4/2024 10:48:21 AM