Art SOLO MPA Manuel De L'utilisateur page 6

I/O INPUT
LEVEL
+4 dBu +4 dBu
Yorkville Sound
550 Granite Court
Pickering, Ontario
-10 dBV -10 dBV
Canada L1W 3Y8
Introduction
Thank you for purchasing Applied Research and Technology's Solo MPA. For users ready to take the next
step, the ART Solo MPA Multivoice Tube Preamplifier picks up where built-in preamps drop off. Combining the
best of both worlds, the Solo MPA allows users to blend between a pristine low-noise/low-distortion solid state
transistor circuit and a warmer Class-A tube mic preamp. Along with the flexible EQ controls, users can voice
the Solo MPA to create their own signature sound.
Featuring 48V phantom power and a variable input impedance control, users can tailor the Solo MPA to suit their
microphone of choice, be it a high-quality dynamic, a studio grade condenser or a low-level ribbon. A Low-Cut control
allows vocals to be sculpted for clarity while the Tilt EQ can be used to emphasize high presence or low-end warmth.
Housed in a compact 1U space rack-mountable chassis with a CNC milled aluminum face plate, the Solo
MPA is designed to deliver years of reliable operation in the studio or at the venue.
The Solo MPA's feature set
• Adjustable input impedance for flexible microphone voicing (600 to 80K ohms).
• Flexible Tilt EQ
• Tunable Lowcut Filter
• Variable Voice Tube/Solid State Control
• Analog VU meter
• Front accessible meter trim
• Backlit function switches
• Discrete class A FET input microphone preamplifier
• Low noise at low gains
• Low THD
• Wide frequency response
• Front mounted Instrument/DI Input
• Very high input impedance
• +4dBu/-10dBV output level selection
• Automatically switches to the instrument input when you plug in
• 1U Rack mount aluminum front plate
• Removeable IEC cord
• Internal power supply
• 3-year parts and labor warranty
2
A .R .T. SOLO MPA A .R .T. SOLO MPA
OUTPUT
CONNECTIONS
INPUT
OUTPUT
BAL ANCED INPUT & OUTPUTS
WARNING - TO REDUCE THE
RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
XLR 1/4-INCH T.R.S. THIS EQUIPMENT TO RAIN
OR MOISTURE
PIN 1 = GROUND TIP = (+ + ) HOT
AVERTISSEMENT - POUR RÉDUIRE
PIN 2 = (+ + ) HOT RING = (-) COLD LE RISQUE D'INCENDIE OU
D'ÉLECTROCUTION, NE PAS
PIN 3 = (-) COLD SLEEVE = GROUND
EXPOSER ET APPAREIL
À LA PLUIE OU À L'HUMIDITÉ
MODEL 111
1v4
SOLOMPA
A-ART-SOLO-MPA
AC INPUT:
SERIAL NUMBER
100-240V
50/60Hz 25W
DESIGNED BY YORKVILLE SOUND
TORONTO, CANADA
FUSE:
Made in China
T1.0A 250V