Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Maintenance operations
Carry out the following maintenance operations at the specified
intervals.
Maintenance operation
Clean the button surface
Check cables for intactness and firm
fit
Check screw connections for
tightness
NOTICE
Solvents contained in cleaning agents can attack the
plastic of the button!
Clean the surface of the button with a neutral cleaning agent
4
or a damp microfiber cloth.
Disassembly
series10 disassembly with lock nut
► Disconnect the system from its voltage supply and secure it
against being switched on again.
► Disconnect the electrical connection and remove the lock nuts.
series10 snap-in disassembly
► Disconnect the system from its voltage supply and secure it
against being switched on again.
► Use a flat head screwdriver to remove the SENSORswitch from
the hole and disconnect the electrical connection.
Disposal
Different types of electrical and electronic components must be
recycled according to their type. All applicable statutory, state and
local laws and regulations must be complied with.
as needed
annually
X
X
X
Publicité
