Publicité
Les langues disponibles
Les langues disponibles
5. INSTALLATION
5.1 Installation information
The following information given here is not an instruction, but simply meant
to give the user a better understanding of the installation.
5.2 Installation place
Install the swimming pool heat pump on a flat, horizontal, and stable surface.
Maintain 1 M of open space in front of the discharge grids and 3 M on the
outlet side of the ventilator. And reserve enough space to allow access to
temperature controller. Make sure that the discharged air will not be breathed
in.
5.3 To perfect your installation
--Avoid directing the flow of ventilated air towards a sensitive noise zone, such
as room window.
--Avoid positioning pool heat pump on a surface that can transmit vibrations to
dwelling.
--Try to avoid placing appliance under a tree or exposed to water or mud,
which would be likely to complicate maintenance.
5.4 Water connection
The heat pump is connected to a filtration circuit with a by-pass.
is imperative that the by-pass is placed after the pump and the filter. The by-
pass generally consists of 3 valves. This makes it possible to regulate the
water flow which passes through the heat pump and to isolate the heat pump
completely for any maintenance work, without cutting the flow of filtered
water.
During the first months of use, your heat pump is subject to condensation.
This will result in water flows, more or less important depending on the
moisture content, which will gradually diminish.
9
It
V.1
Publicité
