Publicité
EN
The dust created while the equipment is in use can be hazardous to health: Always wear goggles and dust mask when sanding; All individuals working with the
sander or coming into the work area should wear a dust mask; It is forbidden to eat, drink and smoke while using the sander; This sander is used for sanding
wood, iron, plastic and similar materials; It is prohibited to use this sander on plaster and surfaces that have leaded paint;
Maintenance
GENERAL INSPECTION
Regularly inspect all fasteners and ensure they are properly tightened. Should any of the screws be loose, retighten it immediately to avoid hazards.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.
CLEANING
For safe operation always keep the machine and its ventilation slots clean.
Regularly check to see if any dust or foreign matter has entered the ventilation slots and the grills around the switches.
Use a soft brush and/or air jet to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
Exterior plastic parts may be cleaned with a damp cloth and mild detergent if necessary.
WARNING!
Never use alcohol, petrol or other deaning agent. Never use caustic agents to clean plastic parts. Water must never come into contact with the tool.
REPLACEMENT PARTS
To assure product safety and reliability, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorised
service centres always using genuine replacement parts.
Environmental protection & disposal
Disposing of the multifunction sander
Used equipment should not be disposed with domestic waste! This symbol indicates that this product may not be disposed of together
with domestic waste in compliance with the (2012/19/EC) directive pertaining to waste electrical and electronic devices (WEEE). This
product should be handed over at an designated collection point. This can occur, for example, by returning it when a similar product is
purchased or by handing it in at an authorised collecting point for the recycling of waste electrical and electronic equipment. Owing to
potentially hazardous substances that are frequently contained in waste electronic equipment, incorrect handling of waste equipment
may have a negative impact on the environment and on the health of human beings. By disposing of this product correctly, you are also
contributing towards an efficient use of natural resources. Information on collecting points for waste equipment can be obtained from
your local authority, the public waste disposal authority, an authorised institution for the disposal of waste electrical and electronic
equipment or the waste collection services. Dispose of the multifunction sander in accordance with the applicable disposal regulations
for your country. Dispose of packaging separately. Dispose of cardboard and paper in waste paper, plastic at collection points.
5
WWW.NIKOLAOUTOOLS.GR
Publicité
