Publicité
Les langues disponibles
Les langues disponibles
TRANSMISSIONS OIL LEVEL CHECK
Transmission 722.6 L / G / P / V, found in C-Class, CLK, S-Class, SL, Vito, Sprinter
Also fits Mercedes gearbox used in Jaguar models.
Red Dipstick, to be used as OEM 140 589 15 21 00
1. Remove dipstick tube cover
2. Fill transmission with required volume of ATF (consult manufacturers data)
3. Run engine, check ATF level and top up if required
4. Check ATF Temperature (via diagnostic equipment)
5. Check level of ATF as follows:
Cold range = 25°C = area marked A on dipstick
Hot range = 80°C = area marked B on dipstick
Note: Accurate measurement only possible at 80°C
Close the dipstick tube properly after the measuring process. Oil dipstick tubes
that are not properly closed can lead to gearbox damage.
Only use a lint-free cloth to clean the dipstick, between and after the measuring
procedures.
Transmission 722.7xx, found in A-Class (W168) and Vaneo (W414)
Green Dipstick, to be used as OEM 168 589 01 21 00
1. Remove dipstick tube cover
2. Fill transmission with required volume of ATF (consult manufacturers data)
3. Run engine, check ATF level and top up if required
4. Check ATF Temperature
5. Check level of ATF as follows:
Cold range = 30°C = area marked 2 to 4 on dipstick
Hot range = 70 to 80 C = area marked 8 to 12 on dipstick
Note: Accurate measurement only possible at 80°C
Close the dipstick tube properly after the measuring process. Oil dipstick tubes
that are not properly closed can lead to gearbox damage.
Only use a lint-free cloth to clean the dipstick, between and after the measuring
procedures.
Transmission 722.8xx (CVT), found in A-Class (W169) and B-Class (W245)
Green Dipstick, to be used as OEM 168 589 01 21 00
1. Remove dipstick tube cover
2. Fill transmission with required volume of ATF (consult manufacturers data)
3. Run engine, check ATF level and top up if required
4. Check ATF Temperature
5. Check level of ATF as follows:
Cold range = 30°C = area marked 2 to 4 on dipstick
Hot range = 70 to 80°C = area marked 5 to 7 on dipstick
Note: Accurate measurement only possible at 80°C
Close the dipstick tube properly after the measuring process. Oil dipstick tubes
that are not properly closed can lead to gearbox damage.
Only use a lint-free cloth to clean the dipstick, between and after the measuring
procedures.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
