Black & Decker BP05PWA Manuel D'instructions page 12

All manuals and user guides at all-guides.com
SET UP & USE
EXHAUST HOSE INSTALLATION
The air exhaust hose and hose inlet must be installed or removed from the portable
air conditioner in accordance with the way it is being used:
COOL, DEHUMIDIFY: Air exhaust hose and hose inlet should be connected to the
FAN: Air exhaust hose and hose inlet should be disconnected from the portable air
conditioner.
1. Connect hose inlet to one end of air
exhaust hose. Push hose inlet over the
end of the hose, push in slightly and then
start threading it on in a clockwise
direction. (see Fig. 1)
2. Connect hose outlet to other end of air exhaust hose. Push hose outlet over the
end of the hose, push in slightly and then start threading it on in a clockwise
direction. (see Fig. 2)
3. Align the hose inlet with the slots over the air exhaust housing and slide down.
(Fig. 3).
4. Affix the hose outlet into the window slider kit and seal. (Fig. 4 & 5)
Fig. 4
.
NOTE: The exhaust hose can be compressed or extended
moderately, but it is desirable to keep the length to a
minimum. Also make sure that the hose does not
have any sharp bends.
Page 12
portable air conditioner.
Fig. 3
Fig. 1
Clockwise
Fig. 5
Fig. 2
Hook