Hinkley 56 ALBA Manuel D'instructions page 6

UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
1
2
12
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
04 | hinkley.com
3
8
4
9
5
10
6
+
11
7
ALBA PACKAGE CONTENT
1 Blade Set of 3
2 Blade support plates
3 Hanging Bracket
4 Ceiling Canopy and Trim Ring
5 Downrod Asm.
6 Yoke Cover
Fan Housing with Motor
7
8 Light Plate W/24w LED
9 Glass Shade
10 Receiver Incl. 9 Wire Nuts
11 Wall Control w/2032 Battery,
Cradle A, Wall Plate, Face Plate,
2 Mounting Screws, Cradle B
(for flat wall use only)
12 Hardware Bag
Bracket Mounting Hardware
(wood screws, screws, lock washers,
star washers, flat washers, wire nuts),
Blade to Motor Screws w/Lock
Washers, Balance Kit, Safety cable
hardware (wood screw, flat washer)
XX=FAN FINISH
BL906556Fxx
In Hardware Bag
CA902672Fxx
DR94016Fxx
YC906556Fxx
x
AP906556Fxx
GL906556ET
CWT906556
980014FWH-R
MH906556Fxx