BGS technic 1101 Mode D'emploi page 3

ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool, with a working range of 40 - 68 mm, enables the brake pistons to be pushed back in a
centered manner without tilting and without damaging the rubber sleeves, pistons or cylinders. The
tool is required for maintenance work and when replacing brake pads and is suitable for almost all
common vehicle types with floating and fixed calipers, single or double piston brake calipers without
an integrated handbrake function. It is a stable version with wide and hardened pressure plates for a
long service life. The spindle ratchet mechanism (switchable) reduces the effort required.
SAFETY INFORMATIONS
● Do not allow children to play with the product or its packaging.
● Repairs to brake systems may only be carried out by qualified persons.
● Keep this product in perfect condition.
● Keep children and unauthorized persons out of the work area.
● Keep the work area clean and tidy.
● Make sure the work area has adequate lighting.
● Make sure that the brake fluid expansion tank does not have a high level; if the brake fluid
level is too high, the brake fluid tank can overflow when the brake pistons are turned back.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Brake Piston Reset Tool
with Ratchet Function
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1101
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed