Publicité
Antenna Installation Instructions / Instrucciones de instalación de la antena / Consignes d'installation de l'antenne
US
HCC Wi-Fi Antenna
1. Remove the plastic cover (three screws) from
the back of the HCC facepack and remove the
existing Wi-Fi antenna.
2. Thread SMA Adapter A (component #7) onto
the male end of the extension cable.
3. Connect the extension cable to the antenna
connector within the facepack, and route
the cable out of the cabinet to the desired
mounting location.
4. Install SMA Adapter B (component #8) on the
other end of the cable and feed the cable up
through the bottom of the antenna mounting
base.
5. Position the antenna mount adapter as
shown, and secure the cable in place using the
locknut on the connector.
6. Reinstall the Wi-Fi antenna and insert the
antenna mount adapter in place within the
mounting base.
7. Attach the antenna mount cover to the base
by twisting the two pieces together clockwise.
Built on Innovation
®
➑
➐
9
Publicité
