Télécharger Imprimer la page

Hunter ANT-EXT-KIT Guide D'installation page 11

Publicité

Antenna Installation Instructions / Instrucciones de instalación de la antena / Consignes d'installation de l'antenne
US
A2C-LTEM Cellular Connection Module
1. Remove the existing antenna from the
A2C-LTEM Module.
2. Thread the male end of the extension cable
to the A2C-LTEM Module.
3. Route the cable out of the cabinet to the
desired mounting location.
4. Feed the other end of the cable up through
the bottom of the antenna mounting base
and thread onto the original antenna.
5. Position the antenna mount adapter
(component #2) as shown.
6. Remove the plastic film from the underside
of the antenna and secure the antenna in
place within the mounting base with the
adhesive sticking to the base.
Built on Innovation
®
Note
The antenna mount cover is not used in this
configuration.
11

Publicité

loading

Produits Connexes pour Hunter ANT-EXT-KIT