Publicité
Antenna Installation Instructions / Instrucciones de instalación de la antena / Consignes d'installation de l'antenne
US
Wireless Valve Output Module
(LoRa Radio)
1. Remove the existing antenna from the
Wireless Valve Output Module.
2. Thread the male end of the extension cable to
the Wireless Valve Output Module.
3. Route the cable out of the cabinet to the
desired mounting location.
4. Feed the other end of the cable up through the
bottom of the antenna mounting base.
5. Position the antenna ground plane
(component #3) as shown, and secure the
cable in place using the locknut on the
connector.
6. Reinstall the WVOM antenna and insert the
antenna mount adapter in place within the
mounting base.
7. Attach the antenna mount cover to the base
by twisting the two pieces together clockwise.
Built on Innovation
®
P/MV
➌
13
Publicité
