Publicité
Les langues disponibles
Les langues disponibles
Model 1971 | Owner's Manual |
!
!
WA r n I n G
WA r n I n G
The manufacturer has made
The manufacturer has made
every effort to eliminate any
every effort to eliminate any
sharp edges. However, you
sharp edges. However, you
should handle all compo-
should handle all compo-
nents with care to avoid
nents with care to avoid
accidental injury.
accidental injury.
Some parts may contain
Some parts may contain
sharp edges, especially
sharp edges, especially
as noted in these instruc-
as noted in these instruc-
tions. Wear protective
tions. Wear protective
gloves if necessary.
gloves if necessary.
!
!
WA r n I n G
WA r n I n G
The use of alcohol, prescrip-
The use of alcohol, prescrip-
tion or non-prescription
tion or non-prescription
drugs may impair the
drugs may impair the
consumer's ability to prop-
consumer's ability to prop-
erly assemble or safely
erly assemble or safely
operate the appliance.
operate the appliance.
06
Assembly Guide
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Make sure all
Please read all instructions thoroughly before proceeding. Make sure all
the plastic packing material is removed before assembling
the plastic packing material is removed before assembling
Find a large, clean area to assemble your griddle. Please refer to the parts list
Find a large, clean area to assemble your griddle. Please refer to the parts list
and assembly diagrams as necessary.
and assembly diagrams as necessary.
S T E P 0 1
Remove the griddle
body from the packaging. Take the
griddle top off and set aside.
S T E P 0 2
Place the griddle upside
down on a soft surface. Use four
(4) M8 flange nuts to attach four
(4) griddle legs to the bottom of
the griddle.
S T E P 0 3
Ensure that the
fuel nozzle is housed within the
burner opening.
S T E P 0 4
Turn the griddle over
so it stands on its legs. Check the
ignition needle. The needle needs
to be placed 3-7mm above the
burner tube.
S T E P 0 5
Place the griddle top on
the griddle body. Make sure the four
positioning pegs on the griddle top
are seated into the griddle body.
3-7mm
Publicité
