LENCO LS-55 UK Mode D'emploi page 11

NOTE
1. the record button is only for phonograph recording
2. the recording is for recording music from the phono record to a USB disk device(-FAT32
format only).
USB OPERATION
1. Press the USB button to turn on USB mode. The RED indicator light will turn on.
2. Inser t the USB device into the USB input on the turntable and the music tracks on the
USB device will start playing.
3. Press the or
4. Press the button to pause or play the track.
5. Press the POWER button to turn off the turntable when you are done.
NOTE
1. USB playing mode has a memory function. When reinserting the same USB device, the
last played track will be resumed.
2. This turntable is equipped with a USB socket that can play MP3/WMA files stored on
standard USB flash drives (compatible with USB version 2.0).
3. USB flash drives with more than 32GB memory may not be compatible
4. Although this product is fully compatible with the USB 2.0 standard format, a small
percentage of USB flash drives might not be readable
REMOVING THE USB DRIVE
Please be sure the stop playback and turn the unit off before removing the USB drive to
avoid damage to the USB and the turntable.
BLUETOOTH OPERATION
1. Press the BT on the front right panel to activate the function and the blue LED light will be
flashing.
2. Set up the Bluetooth playback device so it searches for other Bluetooth devices.
3. Select the entry "Lenco LS-55" from the list of found devices on your Bluetooth Playback
device. If pairing is the LED light will stop flashing and stay on blus.
4. Play your music through the connected device and enjoy.
buttons to choose your desired track.
11