LENCO LS-55 UK Mode D'emploi page 10

NOTE
1. If the Line Out jack of your external device is connected, you only need to adjust the
volume control of this system.
2. Make sure the tone arm is securely locked to avoid any damage.
3. Press POWER button to turn off the turntable when you are done. Don't forget to turn
off the power on your external device as well.
PLAYING RECORDS
This turntable is full-sized, belt-driven, and plays 33, 45, and 78 RPM records.
1. To turn the turntable on, press the POWER button to set the volume to a low level.
2. Press the PHONO button to turn on phono mode. Please be sure that you have removed
the stylus cover from the stylus and have released the Tone arm lock.
3. Set the turntable speed switch to the appropriate speed of 33, 45 or 78 RPM. Set the
record on the turntable. If you are playing 45 RPM singles, place the 45 RPM adapter on
the center spindle.
4. Slide the AUTO STOP Control switch to choose the auto stop function
5. Adjust the VOLUME control to set the volume as desired.
6. Press the POWER button to turn off the system when you are done.
7. Please keep the dust cover open when playing a record.
PHONOGRAPH RECORDING OPERATION
1. Place a phono record on the turntable.
2. Plug a USB disk into the USB socket. Press the record button, the RED LED indicator light
will flash, meaning the recording has started.
3. Press the record button again when you are finished recording.
4. Press the USB button with the blue light and you will hear the recorded music from the
USB.
10