Publicité
Les langues disponibles
Les langues disponibles
en Basic settings
Basic setting
Remote start
Add mobile
device
Network informa-
tion
Delete network
settings
Software update
13.2 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
14.2 Overview of the basic settings
You can find an overview of the basic settings here.
52
Selection
On
Off
-
-
-
-
Description
Switch remote start on the appliance
on and off.
Note: With the "Home Connect" app
only switch-off is possible.
Connect the appliance to the "Home
Connect" app or additional accounts.
Display network information and appli-
ance information.
Note: You cannot operate your appli-
ance via the "Home Connect" app
without a network connection.
Note: This setting is only available
with a software update.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
14 Basic settings
You can configure your appliance to
Basic settings
meet your needs and call up addi-
tional functions.
14.1 Changing the basic set-
tings
Press
.
1.
a The display shows the list of basic
settings.
Change the required basic setting.
2.
a The appliance saves the basic set-
ting automatically.
To exit the basic settings, press
3.
.
Publicité
