Tineco FLOOR ONE S2 Serie Mode D'emploi page 13

Filling Clean Water Tank
Press the Clean Water Tank release button to
remove it from the appliance.
Place the tank back into the appliance. You
should hear a "Click" if done correctly.
Charging Instructions
Warning:
• Only charge the appliance with the adaptor supplied by Tineco.
• During long periods of not being used, the appliance must be charged once every 3 months for
optimal performance.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures.
Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).
②
①
Please charge the appliance when the indicator is blinking.
1. To charge the appliance, connect the external charging cord
to the appliance and plug it into the wall outlet.
2. To avoid tripping hazards, please place the appliance on the
storage tray near a wall during charging.
Open the tank cap, and fill with tap water to the
Max line. When deep cleaning is necessary, add
one bottle cap of solution to the CWT and tightly
close the cap.
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
11
MAX