Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
1- Lithium/alkaline battery and solar cell power supply provides a service life of 5,000 hours, 15-20 minu-
tes with automatic closing function.
2- The internal or external control knobs can be used to manually select shades 9-13, sensitivity and
delay time control, welding/grinding functions.
3- Dual photoelectric sensor technology, high-quality dual LCD and fi lter provide the welder with a clear
fi eld of view and effective UV ray protection, up to grade DIN13.
4- Ultra-quick LCD darkening. The fi lter switch time from light to dark is no more than 1/1000s EN 379
(1/25000s, ANSI Z87.1) standard, so as to protect the eyes from arc damage.
5- In the LCD bright state, the degree of protection is DIN4; it takes 0.1-1.0s from dark state to bright state
when arcs disappear with sensors.
6- The operating temperature is -5 °C ÷ +55 °C.
7- Broad scope of applications - for example, manual arc welding, gas shielded arc welding and plasma
cutting.
8- Fully adjustable headgear, for increased comfort and reduced fatigue.
Operating instructions
1. Before welding, please make sure that:
1.1 the protective fi lm has been removed from the internal and external screen;
1.2 the power is suffi cient (fl at battery indicator in the helmet);
1.3 the protective fi lms are complete, the solar cell is not damaged or blocked by dust;
1.4 the operating parts are not worn off or damaged. Any scratched or broken parts should be replaced
immediately, so as not to incur any personal injury;
1.5 the welding helmet is properly replaced and stored before each use;
1.6 Choose the right shade number according to machine type and welding current.
2. Shade number selection (DIN9-13)
2.1 The shade number can be manually set from 9 to 13; the adjusting knob is outside the mask. To set the
proper shading number, rotate the adjusting knob, being careful not to set the grinding function.
2.2 Adjust the helmet to the correct shade for the welding process by referring to (Table 1).
DIN
SMAW/MMA
MIG
TIG,GTAW
MAG/CO
2
PAC
PAW
8
Features of welding helmet 7042LCD
1
5
15
0.5
2.5
10
9
8 9
AMPERES
30
60
100 150 200 250 300 400 500
20
40
80
125 175 225 275 350 450
9
10
11
10
11
10
11
10
11
11
10
11
12
12
12
12
13
12
13
12
13
EN
13
13
13
Table 1
Publicité
Table des Matières
