Publicité
Les langues disponibles
Les langues disponibles
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function
Effect
Super Wash Allows for an
impeccable wash,
visibly whiter than
a standard Class A
wash.
Easy iron
This opti on reduces
the amount of
creasing on fabri cs,
making them easier
to i ron.
Extra Rinse
Increases the
efficiency of the
rinse.
Spin
The washing
exclusion
machine wil l not
carry out the spin
cycle.
Comments
When this function is set, programmes 6, 7, 8, 11
and Deli cate rinse wil l end with the l aundry left to
soak (Anti-crease) and the Rinse cycle phase LED
wil l flash.
- to conclude the cycl e, press the START/RESET
button;
- to run the drai ning cycl e alone, set the knob to the
relative symbol
and press the START/RESET
button.
Recommended when the appl iance has a full load or
with large quanti ties of detergent.
We recommend to you use it when washi ng garments
are diffi cul t to iron.
GB
Enabled with
programmes:
1, 2, 3, 4,
5, 6, 7, 8
All
programmes
except for
1, 2, 9, 10
and
Draining.
1, 2, 3, 4, 5,
6, 7, 8, and
Rinse
cycles.
All
programmes
except for
11 and
draining.
7
Publicité
