Publicité
Les langues disponibles
Les langues disponibles
32
Automatic fast preheating
This function allows automatic addition of fast preheating to the baking
systems that allow it.
Rotate the KNOB to select the Auto setting. Choose On or OFF.
Sabbath
The Sabbath function allows keeping the food warm tin eh oven without
having to switch the oven on or off.
Rotate the KNOB to select SAbb. Choose On or OFF.
Set the duration (between 24 and 72 hours) and temperature. Confirm
each setting by pressing the KNOB.
If you wish the oven light to be on all the time, switch it on by touching
the
symbol.
Touch the
key to start the countdown. SAbb will appear on the
display unit.
All sounds and operation, except for the
INFORMATION!
In case of a power outage, the Sabbath mode will be deactivated
and the oven will return to the initial state.
Factory settings
This function allows resetting the appliance to factory settings. FAct will
appear on the display unit. Rotate the KNOB to select rES. Press the
key until the end of the animation to confirm.
Water hardness
Rotate the KNOB to choose between five water hardness levels. The
default setting is level 5.
Whr 1 is the lowest water hardness level.
Whr 5 is the highest water hardness level.
Emptying the water tank
This function allows emptying the water tank after the baking process,
when you have used the steam injection during the baking process
function. UnFil will appear on the display unit. Rotate the KNOB to select
and confirm No to exit the setting.
To empty the water tank, first remove the food from the oven. Place the
all-purpose deep baking tray into the 5th rack level. Select YES on the
display unit and confirm. The water tank emptying process will begin.
When the process is complete, remove the baking tray with water from
the oven and wipe the oven dry.
key, will be deactivated.
Publicité
