NAVEE S40-E Informations Importantes page 7

4. Specifications
EN
Name
Product
Model
Vehicle: L × W × H (mm) [1]
Dimensions
After Folding: L × W × H (mm)
Net Weight Vehicle Net Weight (kg)
Load Range (kg)
Rider Age (years)
Body Length (cm)
Max. Speed (km/h)
General Range (km) [2]
Max. Climbing Angle (%)
Suitable Surfaces
Assembled
Electric Scooter
Operating Temperature (°C)
Storage Temperature (°C)
IP Rating
Charging Time (h)
Model
Nominal Voltage (VDC)
Max. Charge Voltage (VDC)
Rated Energy (Wh)
Battery Pack
Intelligent Battery
Management System
Normal Charging Temperature
Range (°C)
Rated Capacity (Ah)
Wheel Motor Rated Power (kW; W)
Model [3]
Output Power (kW; W)
Battery Charger Input
Max. Output Voltage (VDC)
Rated Output (VDC; A)
Tire Front & Back Tires
Frequency Band (s)
Bluetooth
Max. RF Power (dBm)
[1] Vehicle height: From the ground to the top of the scooter.
[2] General range: Measured when there is no wind and at 25°C, the scooter is fully charged to ride at a constant speed of 15 km/h on a flat
surface with a load of 75 kg.
[3] To recharge the battery, only use the battery charger provided in the package. Please see battery charger parameters in Specifications.
09
NAVEE Electric Scooter
S40-E S40-D
1195 × 610 × 1280
1195 × 605 × 560
22.2
25–120
16 – 50
120 – 200
25 20
Approx. 40
Approx. 18
Cement or asphalt road, with benches of less than 1 cm or crevices
narrower than 3 cm
-10 to 40
-20 to 45
IPX5
Approx. 6
T2208-BA3A
36
42
275.4
Over-heating, short circuit, over-current, over-discharge, and
over-charge protection
0 to 40
7.65
0.35; 350
LI-0554200130NA
0.0533; 53.3
100-240 V~ 50-60 Hz
42.0
41.0; 1.3
10-inch pneumatic tires
2.4000 – 2.4835 GHz
8
5. Certification
Restriction of Hazardous Substances Directive (RoHS)
This Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. product, with included parts (cables, cords,
and so on) meets the restriction of the use of certain hazardous substances in electrical and electronic equipment
2011/65/EU Annex II and its amendment Directive (EU) 2015/863.
EU Declaration of Conformity
This device meets the EU requirements on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
Hereby, Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. declares that the radio
equipment type: [S40-E] and [S40-D] are in compliance with Directive 2014/53/EU and 2006/42/EC.
The full text of the EU declaration of conformity is available at the following internet address: www.
naveetech.com
Hereby, Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. declares that the radio equipment
type [S40-E] is in compliance with the Radio Equipment Regulations 2017, Supply of Machinery (Safety)
Regulations 2008 and the Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at
the following internet address: www.naveetech.com
European Union Compliance Statement
Battery recycling information for the European Union
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and
amendment 2013/56/EU concerning batteries and accumulators and waste batteries and accumulators.
The Directive determines the framework for the return and recycling of used batteries and accumulators
as applicable throughout the European Union. This label is applied to various batteries to indicate that
the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and
accumulators are labeled to indicate that they are to be collected separately and recycled at end of life.
The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb
for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of
batteries and accumulators as unsorted municipal waste, but use the collection framework available to
customers for the return, recycling, and treatment of batteries and accumulators. Customer participation
is important to minimize any potential effects of batteries and accumulators on the environment and
human health due to the potential presence of hazardous substances.
Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste
collection facilities, the end user of equipment containing batteries and/or accumulators must remove
those batteries and accumulators for separate collection.
EN
10