Publicité
Les langues disponibles
Les langues disponibles
•
Before using the appliance, please check the voltage and the type of plug that
is required for your location.
•
Before first use, remove all packing materials from the appliance and
its accessories. Thoroughly clean parts that come in contact with food
and dry the appliance thoroughly as described in the "CARE AND
MAINTENANCE" section.
•
Always ensure the switch control is in its Off position "0" before assembling or
plugging in.
•
Always unplug the appliance when finished operation, before cleaning,
assembling or disassembling, or before you take the appliance apart or when
not in use.
•
Switch the appliance on only when fully assembled. Before use, always check
whether the appliance is assembled properly.
Note: Check the stainless steel filter for signs of damage before each use.
•
To reduce the risk of personal injury, never use a cracked, bent, or damaged
filter. Do not use the appliance if the filter or the protecting cover is damaged
or there are visible cracks on it.
HOW TO ASSEMBLE
NOTE: Before assembling the juice extractor, make sure it is unplugged and the
switch control is in its "0" position.
1. Place the filter base on top of the main body
properly. The spout should fit into the slot on the
side of the main body.
2. Place the stainless steel filter in the center of the
filter base. Press down until it snaps into place.
Make sure it sits properly on the filter base so that
the stainless steel filter will rotate evenly.
Note: The filter contains small sharp blades at the
base to cut and process fruits and vegetables. Do
not touch blades when handling the filter.
3. Place the top cover over the filter base, then snap
the safety locking latches on both sides: clipping the
top of the latches to the lid, then snap the bottom of
the latches into place.
Note: The appliance will not operate if the top cover
is not fitted correctly.
4.
Slide the food pusher into the feeding chute by
aligning the groove on the pusher with the small
ridge in the feeding chute.
5.
Slide the pulp container into place position.
Note: Never turn on the appliance without the pulp
container in place, and do not remove the pulp
container when the appliance is operating.
6.
Place the juice cup under the spout. Make sure the
lid is attached to the
Note: Always put the lid on the juice cup to avoid
splattering.
IMPORTANT
juice cup.
5
4
3
2
1
Publicité
