Ga.Ma GSE GC910 XPERT Manuel D'utilisation page 17

CLEANING AND MAINTENANCE:
A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
CLEANING THE HEAD:
Before any cleaning operation, make sure that the appliance is properly turned off and disconnected from the
power outlet. Remove the accessory if it is inserted. Using the special brush supplied, remove any hair residues
between the blades and the back of the blade head.
NEVER DISASSEMBLE THE HEAD OF THE BLADE OR YOU WILL INVALIDATE THE WARRANTY ON THE
ENTIRE PRODUCT.
HOW AND WHEN TO LUBRICATE THE BLADE:
Before the first use we recommend lubricating the blade with a drop
of the oil found in the package or with any other lubricating oil (make
sure that it is not too viscous).
Turn the hair clipper upside down (Fig.3) so that oil does not drip on
the appliance. Lubricate the blade with a few drops of oil. Turn the
appliance on for a few seconds so that the oil is distributed evenly
along the entire blade.
Then, using a dry cloth, eliminate any excess oil residues.
18
Fig.3