Publicité
Les langues disponibles
Les langues disponibles
en Cleaning and servicing
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
Take out all of the food and store it
3.
in a cool location.
Place ice packs (if available) onto
the food.
Remove all fittings from the appli-
4.
ance. → Page 37
Cleaning the appliance
Clean the appliance as specified to
ensure that it is not damaged by in-
correct cleaning or unsuitable clean-
ing products.
WARNING
Risk of electric shock!
An ingress of moisture can cause
¡
an electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Liquid in the lighting can be dan-
¡
gerous.
The rinsing water must not run
▶
into the light.
ATTENTION!
Unsuitable cleaning products may
¡
damage the surfaces of the appli-
ance.
Do not use hard scouring pads
▶
or cleaning sponges.
Do not use harsh or abrasive
▶
detergents.
Do not use cleaning products
▶
with a high alcohol content.
If you clean fittings and accessor-
¡
ies in the dishwasher, this may
cause them to become deformed
or discolour.
Never clean shelves or contain-
▶
ers in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 35
36
Clean the appliance, the fittings
2.
and the door seals clean with a
dish cloth, lukewarm water and a
little pH-neutral washing-up liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
→ Page 32
Switch on the appliance.
6.
→ Page 34
Putting the food into the appliance.
7.
Cleaning the condensation
channel and drainage hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Remove the pull-out container.
1.
→ "Removing pull-out containers",
Page 37
Carefully clean the condensation
2.
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
4
Cleaning the ventilation grille
Remove the ventilation grille for
1.
cleaning.
To do this, depress the clips in
‒
the ventilation openings and
simultaneously remove the vent-
ilation grille forwards.
→ Fig.
5
Clean the ventilation grille with
2.
lukewarm soapy water and a dish
cloth.
Let the ventilation grille dry com-
3.
pletely and insert it.
Publicité
