JAC ZIP Mode D'emploi page 12

E. Remove the nut (fig.9, n°21), washer (fig.9, n°22) and flange (fig.9, n°20) in order to remove
the blade (fig.9, n°19).
F. Remove the blade with a rotating movement in order to get it clear of the side guide.
Repeat steps F, E, D in this order, bearing in mind that the nut (fig.9, n°19) needs to be tightened
anticlockwise.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
Please note that your blade can be sharpened; contact your approved agent for further information.
9 CONSUMABLES
When ordering spare parts, check with your approved agent which part is required based on the
spare parts catalogue issued by the manufacturer.
Always quote the machine serial number shown on the nameplate.
Your agent will place the orders with JAC.
9.1 List of CONSUMABLES
ITEM CODE
6110022 CIRCULAR BLADE, Ø 200 MM
5310113 LOAF HOLDER SPRING
5310107 MOTOR SPRING
10 MALFUNCTIONS
Problem
The machine will not start
The machine is running, but
the loaves are damaged or
cut unevenly
English
DESCRIPTION
Connect the machine using the cable (fig.2, n°14).
Switch on the main switch (fig.2, n°13).
Check that the cover has been replaced correctly (fig.2, n°3, 5, 7).
Check whether the blade needs replacing (fig.8).
Leave the bread to cool down for a few hours.
Feed in a loaf of the specified size.
Feed in a loaf that is sufficiently firm.
MODEL
ALL
ALL
ALL
Check
12